Components
ALZET OSMOTIC IMPLANTABLE PUMPS
from SAI Alzet Pumps Not for sale outside of North America
| 1003D | |
ALZET PUMPS

Alzet osmotic pumps are miniature,
implantable pumps used for research
in mice, rats, and other laboratory animals.
These infusion pumps continuously deliver drugs, hormones, and other
test agents at controlled rates from one day to four weeks without the
need for external connections or frequent handling. Their unattended
operation eliminates the need for repeated nighttime or weekend dosing.
They can be used for systemic administration when implanted
subcutaneously or intraperitoneally. They can be attached to a catheter
for intravenous, intracerebral, or intra-arterial infusion. They can
also be used for targeted delivery, where the effects of a drug or test
agent are localized in a particular tissue or organ, by means of a
catheter. The pumps have been used to target delivery to a wide variety
of sites including the spinal cord, spleen, liver, organ or tissue
transplants, and wound healing sites. They have been used in thousands
of studies on the effects of controlled delivery of a wide range of
experimental agents including peptides, growth factors, cytokines,
chemotherapeutic drugs, addictive drugs, hormones, steroids, and
antibodies. Due to the unique mechanism by which AlzetŪ pumps operate,
compounds of any molecular conformation can be delivered predictably at
controlled rates independent of their physical and chemical properties.
They are intended for use in experimental animals only, but are not to
be placed into animals used for food products. Not for use in humans.
Pumps Advantages:
- Ensure around-the-clock exposure to test agents at predictable levels
- Permit continuous administration of short half-life proteins and peptides
- Provide a convenient method for the chronic dosing of laboratory animals
- Minimize unwanted experimental variables and ensure reproducible, consistent results
- Eliminate the need for nighttime or weekend dosing
- Reduce handling and stress to laboratory animals
- Small enough for use in mice or very youg rats
- Allow for targeted delivery of agents to virtually any tissue
- Cost-effective research tool
Tips:
Catheters are now available perfectly suited for Alzet Pumps
- Rat jugular
- Rat Femoral
- Rat Intrathecal
- Rat Femoral Tapered
- Mouse Jugular
Mouse Ambulatory Infusion System
Rat Ambulatory Infusion System | Complete Osmotic Pump; Length: 1.5 cm, Diameter: 0.6 cm, Weight: 0.4 g, Total Displaced Volume: 0.5 ml, Filling Tube; Length:1.1 cm, Gauge: 27, O.D.: 0.04 cm, I.D.: 0.02 cm, Flow Moderator; Length: 1.3 cm, Gauge: 21, O.D.: 0.08cm, I.D.: 0.05 cm, Weight: 0.05 g, Material Flange: Styrene Acrylonitrile, Material Cap: N/A, Material Tube: Stainless Steel 304 (non-metal alternatives) Flow Rate; (1.0 ul/hr, 3 days)
| | | part # 0000289 | details/options> Price: $17.45 | |
| 1007D | | | Complete Osmotic Pump; Length: 1.5 cm, Diameter: 0.6 cm, Weight: 0.4 g, Total Displaced Volume: 0.5 ml, Filling Tube; Length:1.1 cm, Gauge: 27, O.D.: 0.04 cm, I.D.: 0.02 cm, Flow Moderator; Length: 1.3 cm, Gauge: 21, O.D.: 0.08cm, I.D.: 0.05 cm, Weight: 0.05 g, Material Flange: Styrene Acrylonitrile, Material Cap: N/A, Material Tube: Stainless Steel 304 (non-metal alternatives) Flow Rate; (0.5 ul/hr, 1 week) | | | Part # 0000290
| details/options> Price: $20.55 | |
| 1002 | | | Complete Osmotic Pump; Length: 1.5 cm, Diameter: 0.6 cm, Weight: 0.4 g, Total Displaced Volume: 0.5 ml, Filling Tube; Length:1.1 cm, Gauge: 27, O.D.: 0.04 cm, I.D.: 0.02 cm, Flow Moderator; Length: 1.3 cm, Gauge: 21, O.D.: 0.08cm, I.D.: 0.05 cm, Weight: 0.05 g, Material Flange: Styrene Acrylonitrile, Material Cap: N/A, Material Tube: Stainless Steel 304 (non-metal alternatives) Flow Rate; (0.25 ul/hr, 2 weeks) | | | Part # 0004317 | details/options> Price: $25.25 | |
| 2001D | | | Complete Osmotic Pump; Length: 3.0 cm, Diameter: 0.7 cm, Weight: 1.1 g, Total Displaced Volume: 1.0 ml, Filling Tube; Length: 2.2 cm, Gauge: 27, O.D.: 0.04 cm, I.D.: 0.02 cm, Flow Moderator; Length: 2.4 cm, Gauge: 21, O.D.: 0.08cm, I.D.: 0.05 cm, Weight: 0.2 g, Material Flange: Styrene Acrylonitrile, Material Cap: PE, Material Tube: Stainless Steel 304 (non-metal alternatives) Flow Rate; (8.0 ul/hr, 1 day) | | part # 0000294
| details/options> Price: $25.25 | |
| 2001 | | | Complete Osmotic Pump; Length: 3.0 cm, Diameter: 0.7 cm, Weight: 1.1 g, Total Displaced Volume: 1.0 ml, Filling Tube; Length: 2.2 cm, Gauge: 27, O.D.: 0.04 cm, I.D.: 0.02 cm, Flow Moderator; Length: 2.4 cm, Gauge: 21, O.D.: 0.08cm, I.D.: 0.05 cm, Weight: 0.2 g, Material Flange: Styrene Acrylonitrile, Material Cap: PE, Material Tube: Stainless Steel 304 (non-metal alternatives) Flow Rate; (1.0 ul/hr, 1 week) | | part # 0000292
| details/options> Price: $17.45 | |
| 2002 | | | Complete Osmotic Pump; Length: 3.0 cm, Diameter: 0.7 cm, Weight: 1.1 g, Total Displaced Volume: 1.0 ml, Filling Tube; Length: 2.2 cm, Gauge: 27, O.D.: 0.04 cm, I.D.: 0.02 cm, Flow Moderator; Length: 2.4 cm, Gauge: 21, O.D.: 0.08cm, I.D.: 0.05 cm, Weight: 0.2 g, Material Flange: Styrene Acrylonitrile, Material Cap: PE, Material Tube: Stainless Steel 304 (non-metal alternatives) Flow Rate; (0.5 ul/hr, 2 weeks) | | part # 0000296
| details/options> Price: $20.55 | |
| 2004 | | | Complete Osmotic Pump; Length: 3.0 cm, Diameter: 0.7 cm, Weight: 1.1 g, Total Displaced Volume: 1.0 ml, Filling Tube; Length: 2.2 cm, Gauge: 27, O.D.: 0.04 cm, I.D.: 0.02 cm, Flow Moderator; Length: 2.4 cm, Gauge: 21, O.D.: 0.08cm, I.D.: 0.05 cm, Weight: 0.2 g, Material Flange: Styrene Acrylonitrile, Material Cap: PE, Material Tube: Stainless Steel 304 (non-metal alternatives) Flow Rate; (0.25 ul/hr, 4 weeks) | | part # 0000298
| details/options> Price: $25.25 | |
| 2ML1 | | | Complete Osmotic Pump; Length: 5.1 cm, Diameter: 1.4 cm, Weight: 5.1 g, Total Displaced Volume: 6.5 ml, Filling Tube; Length: 3.5 cm, Gauge: 25, O.D.: 0.05 cm, I.D.: 0.03 cm, Flow Moderator; Length: 4.6 cm, Gauge: 21, O.D.: 0.08cm, I.D.: 0.05 cm, Weight: 0.9 g, Material Flange: Styrene Acrylonitrile, Material Cap: PE, Material Tube: Stainless Steel 304 (non-metal alternatives) Flow Rate; (10.0 ul/hr, 1 week) | | part # 0000323
| details/options> Price: $25.25 | |
| 2ML2 | | | Complete Osmotic Pump; Length: 5.1 cm, Diameter: 1.4 cm, Weight: 5.1 g, Total Displaced Volume: 6.5 ml, Filling Tube; Length: 3.5 cm, Gauge: 25, O.D.: 0.05 cm, I.D.: 0.03 cm, Flow Moderator; Length: 4.6 cm, Gauge: 21, O.D.: 0.08cm, I.D.: 0.05 cm, Weight: 0.9 g, Material Flange: Styrene Acrylonitrile, Material Cap: PE, Material Tube: Stainless Steel 304 (non-metal alternatives) Flow Rate; (5.0 ul/hr, 2 weeks) | | part # 0000325
| details/options> Price: $30.15 | |
| 2ML4 | | | Complete Osmotic Pump; Length: 5.1 cm, Diameter: 1.4 cm, Weight: 5.1 g, Total Displaced Volume: 6.5 ml, Filling Tube; Length: 3.5 cm, Gauge: 25, O.D.: 0.05 cm, I.D.: 0.03 cm, Flow Moderator; Length: 4.6 cm, Gauge: 21, O.D.: 0.08cm, I.D.: 0.05 cm, Weight: 0.9 g, Material Flange: Styrene Acrylonitrile, Material Cap: PE, Material Tube: Stainless Steel 304 (non-metal alternatives) Flow Rate; (2.5 ul/hr, 4 weeks) | | part # 0000327
| details/options> Price: $36.15 | |
| Flow Moderator 100X Pumps
| | | The flow moderator is used with each pump. Comprised of a stainless steel tube with a plastic cap and/or flange on one end, depending on the pump model. The stainless steel tube provides capillary action, which prevents the test solution from leaking out of the pump reservoir. The steel tube also provides a means for attaching a catheter to all models of Alzet pump. | | part # 0002602
| details/options> Call for pricing | |
| Flow Moderator 200X Pumps | | | The flow moderator is used with each pump. Comprised of a stainless
steel tube with a plastic cap and/or flange on one end, depending on
the pump model. The stainless steel tube provides capillary action,
which prevents the test solution from leaking out of the pump
reservoir. The steel tube also provides a means for attaching a
catheter to all models of Alzet pump. | | part # 0002486
| details/options> Call for pricing | |
| Flow Moderator 2MLX Pumps
| | | The flow moderator is used with each pump. Comprised of a stainless
steel tube with a plastic cap and/or flange on one end, depending on
the pump model. The stainless steel tube provides capillary action,
which prevents the test solution from leaking out of the pump
reservoir. The steel tube also provides a means for attaching a
catheter to all models of Alzet pump. | | part # 0002501
| details/options> Call for pricing | |
| Filling Tube 100X Pumps | | | The filling tube is a blunt-tipped needle that is cut to the appropriate length. It has a hub for attaching to a syringe. | | part # 0007988
| details/options> Call for pricing | |
| Filling Tube 200X Pumps | | | The filling tube is a blunt-tipped needle that is cut to the appropriate length. It has a hub for attaching to a syringe. | | part # 0007987
| details/options> Call for pricing | |
| Filling Tube 2MLX Pumps | | | The filling tube is a blunt-tipped needle that is cut to the appropriate length. It has a hub for attaching to a syringe. | | part # 0007986
| details/options> Call for pricing | |
|